首页
期刊导航
期刊检索
论文检索
新闻中心
期刊
期刊
论文
首页
>
《武汉理工大学学报:材料科学英文版》
>
2011年1期
>
Twin-wire Submerged Arc Welding Process of a High-strength Low-alloy Steel
Twin-wire Submerged Arc Welding Process of a High-strength Low-alloy Steel
打印
分享
在线阅读
下载PDF
导出详情
摘要
低合金的钢(HSLA)使遭到了的一个高张力的热周期曲线的测量成双电线的沉没弧焊(锯)被介绍。热模拟测试被使用获得的曲线执行。影响坚韧在?50以不同方法。段和接口性质被测量。结果显示出穿着的板是的那20层比其它好。结合得好的穿着的板成功地在下列过程被获得:从18张层Al1060/Al3003表的基本的穿着的表第一在450点与44%的起始的滚动减小被获得???????????????″??吗??
DOI
ojnp1e7x4r/962361
作者
YANG Xiuzhi XU Qinghua YIN Niandong XIAO Xinhua
机构地区
不详
出处
《武汉理工大学学报:材料科学英文版》
2011年1期
关键词
高强度低合金钢
双丝埋弧焊
焊接热循环
热模拟试验
透射电子显微镜
热循环曲线
分类
[一般工业技术][材料科学与工程]
出版日期
2011年01月11日(中国期刊网平台首次上网日期,不代表论文的发表时间)
相关文献
1
Toshihiko KOSEKI.
Microstructure development in high-strength low-alloy steel welds
.钢铁冶金,2010-12.
2
张顺善;邹增大;曲仕尧;王新洪.
Arc characteristics of twin-wire indirect arc gas shielded welding
.焊接,2010-01.
3
余圣甫;代轶励;闫宁.
Inclusion behavior and microstructure of weld metal with Ce in twin wire high heat input submerged-arc welding
.焊接,2017-01.
4
BAI Qiang;ZOU Yan;KONG Xiangfeng;GAO Yang;DONG Sheng;ZHANG Wei.
The Influence of the Corrosion Product Layer Generated on the High Strength Low-Alloy Steels Welded by Underwater Wet Welding with Stainless Steel Electrodes in Seawater
.海洋科学,2017-01.
5
毕宗岳;刘海璋;井晓天;牛辉.
Research on submerged arc welding wire for X100 pipeline steel
.焊接,2011-02.
6
杨林;蒋晓虎;王孝虎.
Study on welding process performance of HG70D high strength steel plate
.焊接,2018-03.
7
.
Finite element analysis of the end cutting process for U-section parts with high-strength steel
.钢铁冶金,2012-01.
8
王吉孝;刘景顺;孙剑飞;王志平.
Microstructure and mechanical properties of twin-wire arc spraying Ni-Swt.% AI coating on 6061-T6 aluminum alloy
.焊接,2013-02.
9
吴开源;何祖伟;梁焯永.
Inverter power supply system for high-power twin-wire pulsed GMAW
.焊接,2016-02.
10
程方杰;武云龙;王颖;张建优;王东坡.
A numerical model of wire melting rate in variable-polarity submerged arc welding
.焊接,2013-03.
来源期刊
武汉理工大学学报:材料科学英文版
2011年1期
相关推荐
Experimental study on the causes of cracking of high-strength steel during bending
Edge defect analysis of high-strength corrosion-resistant steel
Seismic Performance of High-Strength Short Concrete Column with High-Strength Stirrups Constraints
An initial study on welding procedure using tandem MIG welding of high strength aluminum alloy
Investigation on hot deformation behavior and mathematical models of flow stress of high-strength structural steel
同分类资源
更多
[材料科学与工程]
不同管径碳纳米管电磁特性与吸波性能研究
[材料科学与工程]
2018年半导体制造设备销售额预期将达627亿美元
[材料科学与工程]
美国AuthenTec开发出耐久性更高的指纹认证滑动传感器
[材料科学与工程]
水龙头铅污染为健康敲响警钟
[材料科学与工程]
Blood compatibility of zinc-calcium phosphate conversion coating on Mg-1.33Li-O.6Ca alloy
相关关键词
高强度低合金钢
双丝埋弧焊
焊接热循环
热模拟试验
透射电子显微镜
热循环曲线
返回顶部