首页
期刊导航
期刊检索
论文检索
新闻中心
期刊
期刊
论文
首页
>
《中国焊接:英文版》
>
2012年2期
>
The influence of joint geometric parameters on shape factor of butt joint with center through crack
The influence of joint geometric parameters on shape factor of butt joint with center through crack
打印
分享
在线阅读
下载PDF
导出详情
摘要
未填写
DOI
g4q5p85948/1154972
作者
张敬强;杨建国;王涛;刘雪松;董志波;方洪渊
机构地区
不详
出处
《中国焊接:英文版》
2012年2期
关键词
形状因子
对接焊缝
几何参数
中心穿透裂纹
有限元分析方法
中心裂纹
分类
[金属学及工艺][焊接]
出版日期
2012年02月12日(中国期刊网平台首次上网日期,不代表论文的发表时间)
相关文献
1
乔羚;韩涛.
Effect of geometric shape of plate on residual stress and deformation distribution for butt-weld joint
.焊接,2018-03.
2
赵熹华;韩立军;赵蕾.
Analysis on the joint tensile strength and fractography of TiNi shape memory alloy precise pulse resistance butt welding
.焊接,2002-01.
3
曹平周;陈建锋;赵文涛.
Experimental investigation on tensile strength of butt welded joint post high temperatures
.焊接,2009-03.
4
.
The Effects of Shape Parameters for Surface Joining with High Order Geometric Continuity
.计算机应用技术,1998-01.
5
王佳杰;杨建国;张敬强;董志波;方洪渊;刚铁.
Shape design of the reinforcement for bending load-carrying capacity of under-matched butt joint under four-point bending load
.焊接,2012-03.
6
.
Investigation of electrode and hydrogen induced crack in welded joint of dissimilar steel
.焊接,1992-02.
7
LI Hui-qiong;WU Liu-cang.
Joint modelling of location and scale parameters of the skew-normal distribution
.基础数学,2014-03.
8
王亚荣;张忠典;李冬青.
Optimization of parameters and study of joint microstructure of resistance spot welding of magnesium alloy
.焊接,2006-02.
9
Xishu Wang;Huaihui Ren;Bisheng Wu;Su Ja;Norio Kawagoishi.
EFFECT OF LOADING TYPE ON FATIGUE CRACK GROWTH BEHAVIOR OF SOLDER JOINT IN ELECTRONIC PACKAGING
.固体力学,2014-03.
10
何柏林;熊磊;于影霞;吕宗敏;满华;江民华.
Fatigue properties of friction stir welded butt joint and base metal of MB8 magnesium alloy
.焊接,2016-01.
来源期刊
中国焊接:英文版
2012年2期
相关推荐
Microstructures and properties of capacitor discharge welded joint of TiNi shape memory alloy and stainless steel
Joint Notice
A Joint Corporation
Joint Notice
Joint Notice
同分类资源
更多
[焊接]
励精图治 迎来春色满华宇
[焊接]
A new method of welding with trailing peening for controlling welding stress and distortion
[焊接]
New development in welding thin-shell aluminum alloy structures with high strength
[焊接]
Fabrication of non-superconducting and superconducting joints of Ag/Bi-2223 tapes by diffusion bonding
[焊接]
Microstructure and mechanical properties of heat-affected zone of 680 MPa grade steel endured thermal cycle of double-wire SAW
相关关键词
形状因子
对接焊缝
几何参数
中心穿透裂纹
有限元分析方法
中心裂纹
返回顶部